END
USER LICENSE AGREEMENT
ACCESS
MANAGER 4.5
IMPORTANT:
LICENSOR IS PROVIDING THIS LICENSED SOFTWARE TO LICENSEE (THE ORIGINAL PURCHASER
EITHER AS AN INDIVIDUAL OR ON BEHALF OF ANOTHER LEGAL ENTITY AS ITS EMPLOYEE OR
AUTHORIZED AGENT) FOR ITS USE SUBJECT TO LICENSEE’S AGREEMENT TO THE TERMS AND
CONDITIONS SET FORTH BELOW. these terms AND CONDITIONS may BE differENT
from the end user license agreement(s) that accompanied earlier releases of the
LICENSED software. please read them
carefully to ensure full understanding before proceeding, AS THEY MAY CONTAIN
ADDITIONAL RESTRICTIONS ON USE OF THE SOFTWARE. PLEASE DIRECT ANY QUESTIONS TO
THE MICRO FOCUS LEGAL DEPARTMENT AT LEGALdept@MICROFOCUS.COM. IF LICENSEE
DOES NOT AGREE TO THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT, LICENSEE
WILL NOT BE AUTHORIZED TO USE THE Licensed SOFTWARE. BY CLICKING The ACCEPT BUTTON OR SIMILAR
ACCEPTANCE MECHANISM DURING INSTALLATION, OR BY COPYING OR USING THE Licensed
SOFTWARE, Licensee ACKNOWLEDGEs THAT IT HAS READ THIS LICENSE AGREEMENT,
UNDERSTOOD IT, AND AGREED TO BE BOUND BY ITS TERMS AND CONDITIONS. THE licensed software is licensed not
sold.
For
this End User License Agreement (“License
Agreement”)
the following terms shall have the meanings given below:
“Documentation” means the Licensor
user documentation that is included with the Licensed
Software.
“Licensee” means the single
legal entity or person that rightfully acquires the Licensed Software from
Licensor or from a distributor or reseller of Licensor.
“License
Options” means those license
options set forth in Annex 1 to this License Agreement.
“Licensor” means NetIQ
Corporation, a Micro Focus company.
“Licensed
Software” means the object code
version of the Licensor computer program(s) listed above, their Documentation,
and other supplemental materials, as provided to Licensee by Licensor, including
but not limited to any software security keys relating thereto. The
Documentation may be delivered electronically and may only be available in the
English language. The Licensed Software will
be accompanied by a license key where required for activation and use of the
Licensed Software. The Licensed Software shall also include, and this License
Agreement shall govern the use of any update to the Licensed Software that
Licensee receives pursuant to a separate support and/or maintenance purchase as
described in Section 6 below, unless such update contains or comes with a
different end user license agreement, in which case such end user license
agreement shall supersede this License Agreement and govern the use of such
software license without need for a
mutually executed amendment to this License Agreement as set forth in Section 17
of this License Agreement. This License Agreement does not grant Licensee the
right to any updates to the Licensed Software unless provided by Licensor under
Section 6 and/or Section 7 below.
“Product
Order” means a document that
has been (i) executed by Licensee describing each Licensed Software license to
be purchased, and (ii) accepted by Licensor. Licensor will accept the Product Order
by either confirming Licensor’s acceptance in writing or by delivering the
Licensed Software to Licensee, whichever occurs first. A Product Order may also mean a written
quote, or if referred to as such, a solution order, issued by Licensor
describing each Licensed Software license purchased that is accepted by Licensee
within the validity period of the quote either by Licensee executing and
returning the quote or a solution order, to Licensor, by Licensee issuing a
purchase order or other written confirmation of acceptance to Licensor in
conformance with the quote, and/or by Licensee paying to Licensor all fees set
forth in the quote. Each Product Order shall constitute a separate agreement and
shall incorporate therein this License Agreement. In the event of any conflict between the
terms and conditions of this License Agreement and the terms and conditions of
any Product Order, the conflicting terms and conditions of the Product Order
shall govern. In no event shall any
terms and conditions contained in a purchase order or similar document issued by
Licensee in connection with this License Agreement or with a Product Order apply
and any such document issued shall be only for the administrative purposes of
identifying the Licensed Software ordered, the number of licenses, and the price
to be paid and shall have no other legal effect. Licensor for purposes of this paragraph
shall mean Licensor or, if applicable, one of Licensor’s authorized resellers
from whom Licensee purchases the Licensed Software, provided however that any
conflicting or additional terms in a Product Order accepted by an authorized
reseller of Licensor shall have no effect unless such terms have been agreed by
Licensor in writing.
“Warranty
Period”
means a period of ninety (90) days from delivery of the Licensed Software to
Licensee.
1 GRANT OF LICENSE; LICENSE CONDITIONS. For payment of the applicable non-refundable license fees identified on the Product Order and subject to Licensee’s compliance with the terms and conditions set forth in this License Agreement, Licensor grants solely to Licensee, as an end user, a personal, perpetual (unless a subscription/term license has been purchased by Licensee), non-transferable, non-sublicensable and non‑exclusive license to use the Licensed Software solely for its own internal use and benefit. Licensee’s use and operation of the Licensed Software and the license grant provided to the Licensed Software is subject to Licensee being in possession of a valid license key where required for the Licensed Software to run. Licensee agrees that Licensor is not liable or responsible for lost or broken license keys or media or the provision of replacement license keys or media and/or new license keys or media unless Licensee is current on support and maintenance for the applicable license and then only to the extent set forth in the applicable annual support and/or maintenance agreement and only to the extent Licensor then has sufficient rights from any applicable third party suppliers, if necessary, to provide such replacement. If not current on support and maintenance for the applicable license, replacement or new license keys or media may be available for purchase at Licensor’s then current list fees for applicable new licenses.
Different License Options are available from Licensor as set forth or referred to in Annex 1. The applicable License Option and license count to be purchased by Licensee for the Licensed Software shall be identified in the Product Order or otherwise identified in writing by Licensor. Licensed Software is also subject to additional terms and conditions as set forth in the “Specific Software Terms” located in Annex 2. Any conflicting terms and conditions shall be resolved according to the following order of precedence: Annex 2, Annex 1, and the main body of the License Agreement.
2
USE
RESTRICTIONS. Except as may be otherwise specifically
permitted in Annex 1 or Annex 2 to this License Agreement, Licensee agrees not
to:
2.1 Copy and/or distribute the Licensed
Software, in whole or in part, for internal use without paying Licensor the
applicable additional fees required by Licensor, except (i) for making a
reasonable number of archival back-up copies; or (ii) as expressly authorized by
Licensor in writing; or (iii) for making a reasonable number of copies of the
Documentation supplied to Licensee by Licensor in electronic form. Licensee shall reproduce and affix all copyright
and other proprietary rights notices appearing in or on the Licensed Software,
including notices of all third party suppliers.
2.2 Use the Licensed Software for
timesharing, facilities management, outsourcing, hosting, service bureau use, or
for providing other application service (ASP) or data processing services to third parties
or for like purposes.
2.3 Modify the Licensed Software or
provide any person with the means to do the same.
2.4 Create derivative works of the
Licensed Software, or translate, disassemble, recompile or reverse engineer the
Licensed Software or attempt to do so (except to the extent applicable law
specifically permits such activity).
2.5 Alter, destroy, or otherwise remove
any proprietary notices or labels on or embedded within the Licensed Software or
Documentation.
2.6 Use the Licensed Software in a manner other than as specifically permitted in this License Agreement.
3 AUDITS. Licensor or an Auditor (as defined below) has the right to verify Licensee’s compliance with this License Agreement (and please see Micro Focus License Compliance Charter - http://supportline.microfocus.com/licensing/licVerification.aspx). Licensee agrees to:
A. Implement internal safeguards to prevent any unauthorized copying, distribution, installation, or use of, or access to, the Licensed Software and associated support and maintenance, or breach of the terms or conditions of this License Agreement;
B. Take all necessary steps to destroy or erase all Licensed Software codes, programs and other proprietary information before disposing of any media containing the Licensed Software;
C. Keep records sufficient to certify Licensee’s compliance with this License Agreement including serial numbers and license keys of the Licensed Software, hypervisor logs where applicable, and the location, model (including quantity and type of processor) and serial number of all machines on which the Licensed Software is installed or from which the Licensed Software is accessed, and the names (including corporate entity) and number of users that are accessing the Licensed Software, and, upon request of Licensor, provide and certify metrics and/or reports based upon such records and account for, among other things, numbers of copies (by product and version) and network architectures as they may reasonably relate to Licensee’s licensing and deployment of the Licensed Software and associated support and maintenance;
D. Upon Licensor’s request, Licensee shall furnish Licensor or an independent auditor chosen at Licensor’s sole discretion (“Auditor”), within seven (7) days of the request, with a completed questionnaire provided by Licensor or the Auditor, and with a written statement, in a format required by Licensor, signed by a director of Licensee, certifying the accuracy of any information provided;
E. Allow a Licensor representative or an Auditor to inspect and audit Licensee’s computers and records, during Licensee’s normal business hours, for compliance with the licensing terms for Licensor’s software products and associated maintenance. Upon Licensor’s (and Auditor’s if applicable) presentation of their signed written confidentiality statement form, Licensee shall fully cooperate with such audit and provide any necessary assistance and access to records and computers; and
F. In the event that Licensee has or at any time has had unlicensed installation, use of, or access to the Licensed Software or has otherwise breached the license granted (a “Non-Compliance”), without prejudice to any other rights or remedies Licensor may have, including without limitation injunctive relief, Licensee shall, within thirty (30) days, purchase sufficient licenses and or subscriptions and associated support and maintenance to cure the Non-Compliance, without benefit of any otherwise applicable discount, by paying Licensor’s current (as of the date of such additional purchase) list license fees and 12-month support and maintenance fees to Licensor for such additional licenses, plus Licensor’s current (as of the date of such additional purchase) list term license and support and maintenance fees and interest (compounded at 1.5% monthly or the maximum rate permitted by applicable law if lower) for such additional licenses for the time period from the commencement of the Non-Compliance until payment of the aforementioned fees. The aforementioned interest shall be payable even if an invoice was not issued at the time the Non-Compliance commenced. If a material license shortfall of 5% or more is found, Licensee shall also reimburse Licensor for the reasonable cost of such audit in addition to other amounts due. The obligations in this Section 3 shall apply to both Licensee’s Non-Compliance and any third party’s Non-Compliance.
4 DOCUMENTATION. One (1) electronic copy of Licensor’s standard Documentation, describing Licensor’s recommended use and application of the Licensed Software, will be furnished or made available on Licensor’s website free of additional charge to Licensee by Licensor with the Licensed Software. Printed copies of any Documentation may be available for purchase from Licensor or its authorized distributors. Additional copies of standard Documentation may be available on Licensor’s website.
5
TERM OF
LICENSE. This License Agreement and Licensee’s
license for the Licensed Software is perpetual, unless a subscription/term
license has been purchased by Licensee (in which case the term of the license
shall be as set forth in the Product Order, specified in Annex 1 or Annex 2, or
as otherwise agreed in writing between the Licensee and Licensor), and is
subject to earlier termination as provided in this Section 5. If Licensee has purchased a
subscription/term license, Licensee’s license to the Licensed Software shall
automatically terminate upon expiry of such subscription/term. Licensor may terminate this License
Agreement and Licensee’s license to the Licensed Software immediately by giving
Licensee written notice of termination in the event that either (i) Licensee
breaches any term or condition of this License Agreement and Licensee has failed
to remedy such breach within ten (10) days of the date of notice from Licensor
to Licensee or (ii) Licensee is wound up, has a receiver appointed or has
applied for or enters into liquidation or bankruptcy or analogous process or
processes. Termination shall be without prejudice to any
other rights or remedies Licensor may have. In the event of any termination Licensee
will have no right to keep, access, or use the Licensed Software or any copy of
the Licensed Software for any purpose and
Licensee shall destroy and erase all copies of such Licensed Software in its
possession or control, and forward written certification to Licensor that all
such copies of Licensed Software have been destroyed or erased. Termination shall not entitle the
Licensee to any refund or reimbursement of any kind of previously paid fees. The
rights and obligations of the parties contained in Sections 3, 8, 9, 10, 11, 12,
and 13, and other sections that by their nature are intended to survive, will
survive the termination or expiration of this License
Agreement.
6 SUPPORT AND MAINTENANCE. Where Licensee purchases support and/or maintenance services, Licensee’s initial support and/or maintenance term will begin upon delivery to Licensee of the Licensed Software and continue for one (1) year thereafter (or the length of the term if less than a year for any subscription/term license) unless otherwise specified in the applicable annual support and/or maintenance agreement, Product Order, or other written agreement executed between Licensor and Licensee. Where Licensee purchases support and/or maintenance for any Licensed Software, Licensee hereby agrees that it shall purchase such support and/or maintenance services for all of Licensee’s licensed units of such Licensed Software product. Support and/or maintenance services provided by Licensor will be subject to Licensor’s then current applicable standard annual support and/or maintenance agreement unless otherwise agreed by the parties in writing.
7 LIMITED WARRANTY. Licensor warrants for the Warranty Period (i) that if the Licensed Software is supplied via media, then the media will be free from defects in materials or workmanship under normal use and (ii) that the copy of the Licensed Software delivered to Licensee conforms in all material respects to the Documentation. As the sole and exclusive remedy for not meeting part (i) of the above warranty, Licensor’s sole obligation shall be to repair or replace free of charge any defective media on which the Licensed Software is delivered if the media is returned to Licensor by Licensee during the Warranty Period. As the sole and exclusive remedy for not meeting part (ii) of the above warranty, Licensor shall repair or replace the Licensed Software free of charge so that it conforms with the warranty or, if Licensor reasonably determines that such remedy is not economically or technically feasible, Licensee shall be entitled to a full refund of the license fee and any maintenance fee paid by Licensee with respect to that particular Licensed Software. Upon such refund Licensee’s license to use such Licensed Software will terminate. The warranty set forth in this Section 7 shall not apply if the defect in the Licensed Software is the result of: (a) the Licensed Software not being used in accordance with the Documentation, this License Agreement or with the platform(s) for which the Licensed Software has been designed and licensed by Licensor; or (b) the Licensed Software having been altered, modified or converted by Licensee or any third party except as may be specified in the Documentation; or (c) the malfunctioning of Licensee’s equipment; or (d) accident or abuse; or (e) service by any unauthorized person; or (f) other software used by Licensee which has not been provided by Licensor or for which the Licensed Software is not designed and licensed for operation; or (g) Third Party Software (as defined herein); or (h) any other cause occurring after initial delivery of the media to Licensee unless caused directly by Licensor. The foregoing states the complete and entire remedies that Licensee has under this warranty. Licensor shall have no responsibility for any warranty claims made outside of the Warranty Period. The foregoing warranty shall not apply to any free-of-charge Licensed Software including updates, though issues with such software may be eligible for support under applicable support terms and conditions.
8
DISCLAIMER OF
WARRANTY. The Licensed Software cannot be tested
in every possible operating environment, therefore Licensor does not warrant
that the functions contained in the Licensed Software will meet Licensee’s
requirements, that operation of the Licensed Software will be uninterrupted, or
that the Licensed Software is error free.
EXCEPT AS SET FORTH HEREIN AND TO
THE EXTENT PERMITTED BY LAW, ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, QUALITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE EXCLUDED
on the part of Licensor
and its third-party suppliers.
Licensee acknowledges that Licensee is responsible for the selection of
the Licensed Software to achieve Licensee’s intended results and for the
installation and/or use of, and results obtained from, the Licensed
Software.
9
LIMITATION OF
LIABILITY. ANY LIABILITY OF LICENSOR SHALL BE
LIMITED IN THE AGGREGATE TO THE AMOUNTS PAID BY LICENSEE FOR THE LICENSED
SOFTWARE GIVING RISE TO THE APPLICABLE CLAIM. THIS LIMITATION APPLIES TO ALL CAUSES OF
ACTION, INCLUDING WITHOUT LIMITATION BREACH OF CONTRACT, BREACH OF WARRANTY,
NEGLIGENCE, STRICT LIABILITY, MISREPRESENTATION AND OTHER TORTS. IN NO EVENT SHALL LICENSOR BE LIABLE FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SIMILAR DAMAGES
NOR FOR ANY LOSS OF PROFITS, CONTRACTS, DATA, OR PROGRAMS, OR THE COST OF
RECOVERING SUCH DATA OR PROGRAMS, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES IN ADVANCE. Licensor’S LIMITATIONS OF LIABILITY ARE
NOT CUMULATIVE. Licensee’s remedies in
this License Agreement are Licensee’s exclusive remedies.
NONE
OF LICENSOR’S THIRD-PARTY SUPPLIERS SHALL BE LIABLE FOR ANY INJURY, LOSS OR
DAMAGE, WHETHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL NOR FOR
ANY LOSS OF PROFITS, CONTRACTS, DATA, OR PROGRAMS, OR THE COST OF RECOVERING
SUCH DATA OR PROGRAMS, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES IN
ADVANCE.
LICENSEE
AGREES THAT, IN ENTERING INTO THIS LICENSE AGREEMENT, EITHER IT DID NOT RELY ON
ANY REPRESENTATIONS (WHETHER WRITTEN OR ORAL) OF ANY KIND OTHER THAN THOSE
EXPRESSLY SET OUT IN THIS LICENSE AGREEMENT, OR IF IT DID RELY ON ANY
REPRESENTATIONS, THAT IT SHALL HAVE NO REMEDY AGAINST LICENSOR IN RESPECT OF
SUCH REPRESENTATIONS.
LICENSEE FURTHER ACKNOWLEDGES THAT THE LIMITATIONS OF LIABILITY IN THIS
SECTION ARE AN ESSENTIAL ELEMENT OF THIS LICENSE AGREEMENT AND THAT, IN THE
ABSENCE OF SUCH LIMITATIONS, THE PRICING AND OTHER TERMS AND CONDITIONS SET
FORTH HEREIN WOULD BE SUBSTANTIALLY DIFFERENT.
NEITHER THIS LICENSE AGREEMENT NOR ANYTHING IN THIS SECTION 9 SHALL
EXCLUDE OR RESTRICT THE LIABILITY OF
Licensor OR ITS THIRD-PARTY SUPPLIERS TO ANY EXTENT NOT PERMITTED BY
LAW.
10 HIGH-RISK
USES. The Licensed Software is not fault
tolerant, nor designed, manufactured or intended for use in hazardous
environments requiring fail-safe performance (including, without limitation, the
operation of nuclear facilities, aircraft navigation or communication systems,
air traffic control, direct life support machines, or weapons systems) in which
failure of the Licensed Software could lead directly or indirectly to death,
personal injury or severe physical or environmental damage. Licensor and its suppliers shall have no
liability for any use of the Licensed Software in any high-risk situations.
11 OWNERSHIP. Licensor (or its affiliates) and where
applicable Licensor’s third party suppliers have and will retain all ownership
rights to the Licensed Software, together with any complete or partial copies
thereof. Such ownership rights include without limitation all patent rights,
copyrights, trademarks, trade secrets, service marks, related goodwill, and
confidential and proprietary information relating thereto. This License Agreement does not convey
any proprietary interest to Licensee with respect to the Licensed Software other
than the license specified herein.
12 THIRD PARTY SOFTWARE AND COMPONENTS. The Licensed Software may come with and/or require certain named third party software programs that Licensee shall license directly from the third party subject to such third party’s terms and conditions (for example Adobe Acrobat or Microsoft Internet Explorer) (“Third Party Software”). Any Third Party Software is provided by the licensor of the Third Party Software solely under a direct license between such third party and Licensee under such third party’s terms and conditions. Therefore the obligations, duties and rights of Licensor and Licensee under this License Agreement do not apply to such Third Party Software. Additionally, Licensor has embedded in some Licensed Software certain run time or other elements provided by third party suppliers to Licensor (“Third Party Components”). Such Third Party Components may also be loaded on the Licensed Software media. Third Party Components are licensed to Licensee pursuant to this License Agreement. Third Party Components may also include open source software, details of which (where applicable) may be found (i) in a file accompanying the applicable Licensed Software or (ii) in the applicable Documentation. Licensee may only access Third Party Components of the Licensed Software in the course of using the Licensed Software. Licensee may not make or attempt any direct access to any such Third Party Components other than with the Licensed Software. All limitations, restrictions and obligations applicable to the Licensed Software set forth in this License Agreement shall apply to Licensee’s use of the Third Party Components. The Third Party Software and Third Party Components are the property of its respective third party supplier to Licensor. Such third party suppliers own all copies of the Third Party Software and Third Party Components, however made. Licensee agrees not to contest the ownership of the Third Party Software and Third Party Components nor use any trademark or service mark belonging to such third party suppliers. Licensee agrees that such third party suppliers are intended third party beneficiaries of all terms and conditions of this License Agreement intended to protect intellectual property rights in the Licensed Software (including the Third Party Components) and limit certain uses thereof. Nothing in this License Agreement shall restrict, limit or otherwise affect any rights or obligations Licensee may have, or conditions to which Licensee may be subject, under any applicable open source licenses to any open source code contained in the Licensed Software.
13 NOTICE TO U.S.
GOVERNMENT END USERS. The Licensed Software and
Documentation are deemed to be “Commercial Items,” as defined at 48 C.F.R.
§2.101, consisting of “Commercial Computer Software” and “Commercial Computer
Software Documentation,” as such terms are used in 48 C.F.R. §12.212 or 48
C.F.R. §227.7207, as applicable.
Consistent with such sections, the Licensed Software and Documentation
are licensed to U.S. Government end users (i) only as Commercial Items, and (ii)
with only those rights as are granted pursuant to this License Agreement. Manufacturer is Micro Focus (US), Inc.,
700 King Farm Blvd., Suite 125, Rockville, MD 20850 as or on behalf of Licensor.
14 LICENSE FEES AND
PAYMENT TERMS. Licensee agrees to pay the applicable
end user license fees for the Licensed Software within thirty (30) days of the
date of invoice or such other date as agreed in writing by the parties. End user license fees are non-refundable
except as provided in Section 7 above, or in the Specific Software Terms below,
and shall be paid without deduction, including without limitation, of any
withholding tax. End user license
fees are exclusive of any applicable transportation charges, value added and
other applicable taxes and duties and all such amounts shall be paid or
reimbursed by Licensee. Outstanding past-due amounts shall accrue interest at
the rate of 1.5% per month compounded or, if lower, the maximum rate allowed by
applicable law. Licensee shall be liable for any such
interest and all related collection costs, whether or not an action has been
filed.
Licensor
may decline to enter into any additional Product Orders if any such past-due
balance, interest and collection costs are not paid.
15 RELATED
SERVICES. Licensee shall be responsible for obtaining and
installing all proper hardware and support software (including operating
systems) and for proper installation and implementation of and training
concerning the Licensed Software.
In the event that Licensee retains Licensor to perform any
services with respect to the Licensed Software (for example: installation,
implementation, maintenance, consulting and/or
training services), Licensee and Licensor agree that such services shall be
subject to Licensor’s then current standard terms, conditions and rates for such
services unless otherwise agreed in writing by Licensor.
16 PRIVACY. If the Licensed Software contains
features that may allow Licensee to collect data from, control and/or monitor
computers running the Licensed Software deployed by Licensee without notice to
or knowledge by users of the Licensed Software, then: (i) Licensee is solely
responsible for, and assumes all liability with respect to, the collection of
data with respect to its users of the Licensed Software including, without
limitation, notifying such users and complying with all data collection, privacy
and other regulations, laws, industry standards and rights of others applicable
to any such activity; and (ii) Licensee shall indemnify and hold Licensor
harmless from and against any damages, claims, losses, settlements, attorneys'
fees, legal fees and court costs and other expenses related to any such
activities or any claims in connection therewith. To the extent permitted by law, by
entering into this License Agreement, Licensee hereby expressly consents to (i)
Licensor sending information to Licensee from time to time advertising the
various products that Licensor provides, whether or not such products are
provided under this License Agreement; (ii) the use of Licensee’s name in
Licensor customer lists, promotional materials and/or press releases; and (iii)
the collection and use by Licensor of information about the computer system on which the
Licensed Software is installed (e.g. product version, serial number) for internal security and licensing purposes;
Licensor does not use this information to identify individuals utilizing such
software.
17 MISCELLANEOUS. Licensor may assign this License Agreement (in whole or in part) to any member of Licensor’s group of companies or to a purchaser of the intellectual property rights in the Licensed Software, but otherwise neither this License Agreement nor any rights hereunder may be assigned (any change of control merger, sale or other transfer of all, or substantially all, of the assets of Licensee shall be included in the meaning of an assignment) nor duties delegated by either party, and any attempt to do so will be void.
If Licensee acquires the Licensed Software in North America, the laws of the state of Utah govern this License Agreement and the licenses granted hereunder and the parties hereto consent and agree that they shall be subject to the exclusive jurisdiction of the State and/or Federal courts sitting in the State of Utah in any action based on this License Agreement or concerning the licenses granted, or the products licensed, hereunder. Each party waives any right it may have to object to such venue, including objections based on personal jurisdiction or forum non conveniens (inconvenient forum). The parties agree that the Uniform Computer Information Transaction Act or any version thereof, adopted by any state, in any form ("UCITA"), shall not apply to this License Agreement. To the extent that UCITA is applicable, the parties hereby opt out of the applicability of UCITA pursuant to the opt-out provision(s) contained therein. If Licensee acquires the Licensed Software in France, Germany or Japan, this License Agreement is governed by the laws of the country in which Licensee acquired the Licensed Software. In the rest of the world the laws of England govern this License Agreement. The aforesaid applicable law shall apply without regard to conflicts of laws provisions thereof, and without regard to the United Nations Convention on the International Sale of Goods. Other than for North American transactions, this License Agreement, the licenses granted hereunder, and the parties hereto, shall be subject to the exclusive jurisdiction of the courts of the country determining the applicable law as aforesaid. In the event of a dispute, the prevailing party shall have the right to collect from the other party its reasonable costs and necessary disbursements and attorneys' fees incurred in enforcing this License Agreement.
This License Agreement is in addition subject to any United States, United Kingdom or European Union laws, regulations and other restrictions regarding export or re-export of computer software and technology. Licensee agrees not to export or re-export any Licensed Software or derivative thereof in contradiction to any such applicable restriction. In particular but without limitation, Licensee acknowledges that Licensor’s products and/or technology are subject to the U.S. Export Administration Regulations (the “EAR”) and Licensee agrees to comply with the EAR. Licensee will not export or re-export Licensor’s products, directly or indirectly, to: (1) any countries that are subject to US or applicable export restrictions; (2) any end user who Licensee knows or has reason to know will utilize Licensor’s products in the design, development or production of nuclear, chemical or biological weapons, or rocket systems, space launch vehicles, and sounding rockets, or unmanned air vehicle systems; or (3) any end user who has been prohibited from participating in export transactions by any applicable agency of government. By downloading or using the Licensed Software, Licensee is agreeing to the foregoing and Licensee is representing and warranting that Licensee is not located in, under the control of, or a national or resident of any such country or on any such list.
Licensor may identify Licensee by name and/or logo as a licensee of Licensor for investor relations, analyst relations, and public relations purposes, and in online and printed sales and marketing materials. Any other use of Licensee’s name or logo, or a description of Licensee’s use of the Licensed Software, shall be subject to Licensee’s prior consent. Within eight (8) weeks after installation of the Licensed Software, upon Licensor’s written request Licensee will provide Licensor with input to a written description of Licensee’s use of the Licensed Software including details of the business challenge, software solution, and results realised from the installation of the Licensed Software. The input shall be provided by a representative of Licensee (who is knowledgeable of the Licensed Software and its performance after installation) during a meeting with a representative of Licensor (at a reasonable time to be agreed by the parties). The meeting may be conducted by telephone. This input may be used internally within Licensor and in confidential sales situations. Any other use of this input shall be subject to Licensee’s prior consent.
Except for the Product Order, this License Agreement is the complete and exclusive statement of agreement between the parties relating to the license for the Licensed Software and supersedes all proposals, communications, purchase orders, and prior agreements, verbal or written, including without limitation prior end user license agreements in relation to the Licensed Software between the parties and end user license agreements embedded in such Licensed Software. No employee, agent, or representative of Licensor has the authority to bind Licensor to any oral representation or warranty concerning the Licensed Software. No representation or statement not expressly contained in this License Agreement nor any supplement, modification, or amendment of this License Agreement will be binding on either party unless executed in writing by a duly authorized representative of Licensor and Licensee (excluding any distributor or reseller of Licensor) to this License Agreement. No waiver of any right under this License Agreement will be effective unless in writing, signed by a duly authorized representative of the party to be bound (excluding any distributor or reseller of Licensor). No waiver of any past or present right arising from any breach or failure to perform will be deemed to be a waiver of any future right arising under this License Agreement. If any provision in this License Agreement is invalid or unenforceable, that provision will be construed, limited, modified or, if necessary, severed, to the extent necessary, to eliminate its invalidity or unenforceability, and the other provisions of this License Agreement will remain unaffected. Each party acknowledges that in entering into this License Agreement it has not relied on any representations, agreements, warranties or other assurances (other than those repeated in this License Agreement and the Product Order) and waives all rights and remedies which but for this section 17 would be available to it. Nothing in this section 17 excludes liability for fraudulent misrepresentation.
If Licensee is situated in Italy, by placing or executing a Product Order, Licensee declares to have read and to have explicitly approved the following clauses of the License Agreement: 5. Term of License, 6. Support and Maintenance, 7. Limited Warranty, 8. Disclaimer of Warranty, 9. Limitation of Liability, 10. High-Risk Uses, 16. Privacy, 17. Miscellaneous, Annex 1, and Annex 2.
ANNEX 1, LICENSE OPTIONS
DEFINITIONS
"Instance" means the
initial copy of the Licensed Software necessary for execution of the Licensed
Software and each additional copy (or partial copy) of the License Software
stored or loaded in memory or virtual memory.
"User"
means a user object in a single directory tree (or other class of object that
contains data representing a person, such as objects containing credit card
information or PIN numbers) that has (a) access or use rights to any portion of
the Licensed Software, or (b) access or use rights to products (devices,
hardware, or software) being managed by the Licensed Software, regardless of
whether the user object is assigned to a person or device. User objects (or
other classes of objects) representing the same person that are linked to each
other within a single tree and/or linked across multiple trees count as only one
User.
"Access
Gateway Software" means the gateway software that performs access management
services to protected web applications, including role based authorization, web
single sign-on and data encryption.
"Identity
Server" means the server software that performs authentication, federation, role
definition and policy distribution.
LICENSE
GRANTS
The
Licensed Software licensing models are typically associated with a “per” phrase
stating the counting basis for the Licensed Software (for example, “Per User” or
“Per Managed Identity” or “Per FTES”, each referred to hereafter as a “Managed
Object”).
Licensee
may install, use and execute the component(s) of the Licensed Software for that
number and type of Managed Objects for which Licensee has paid Licensor a
license fee. The manner of
calculating the type and number of Managed Objects for which Licensee need a
license for the Licensed Software shall be determined by Licensor based on
Licensee’s configuration and operation of the Licensed Software and interpreted
with reference to the Sources, unless otherwise agreed in a fully executed
agreement between Licensee and Licensor.
The
following licenses apply to Licensee’s use of the Licensed Software depending on
whether Licensee has purchased licenses to the Licensed Software. For evaluation rights, please see the
Evaluation Software paragraph below.
User
Model. Licensee must acquire a user license for
each User. Each person who accesses or uses the Licensed Software must have at
least one user object uniquely assigned to that person and access the Licensed
Software through the user object.
Instance
Model.
The Access Gateway component of the Licensed Software and the Identity Server
component of the Licensed Software are licensed separately. Use of each requires purchase of the
applicable quantity of Access Manager instance licenses.
Access
Gateway. Licensee must acquire an Access Manager
instance license for each Instance of the Access Gateway Software.
Identity
Server. Licensee must acquire an Access Manager
instance license for each Instance of the Identity Server
Software.
NetIQ Access Manager
Appliance. If Licensee deploy the Licensed Software
as an appliance, then Licensee will have installed an Instance of the Access
Gateway Software as well as an Instance of the Identify Server Software. Consequently, Licensee must acquire two
(2) Access Manager Instance licenses for each appliance.
Managed
Identity Model
If
Licensee has a “per managed identity” license, the following terms and
conditions apply to Licensee’s use of the Licensed
Software:
A
"per managed identity" license is required for every active “identity” managed
by or connecting through the licensed product. A Managed Identity means user
and/or custom objects (including either or both human and/or non-human objects
but not including group objects) collected within the Licensed Software from all
user or identity sources. For
purposes hereof, an “identity” means user and/or custom objects including either
or both human and/or non-human objects. Inactive identities (not accessed in
>120 days and marked as "disabled") do not require licenses. Duplicated identities within the
Licensed Software will each require a managed identity
license.
FTES
Model
If
Licensee has a “per FTES” license, the following terms and conditions apply to
Licensee’s use of the Licensed Software:
FTES
means full time equivalent staff.
Licensee must purchase an FTES License for every full time and part time
staff, faculty and administration, regardless of role and anticipated use of the
Licensed Software. Students, alumni
and parents do not require a license but use of the Licensed Software by such
groups shall be limited to use for academic purposes only. The number of FTES shall be calculated
as the sum of Licensee’s most recently reported number of (a) full-time
equivalent staff (counted as one FTES for licensing purposes) and (b) part-time
staff (counted as ½ FTES for licensing purposes). The FTES calculation for each
category of full and part time staff must be demonstrated through a verifiable
means that may include use of an audited annual report, an organization’s human
resource system, or the government website, government report, or other
published report provided by Customer that shows accurate information. NetIQ may also verify Licensee’s
reported FTES count by accessing http://nces.ed.gov/globallocator/
or other government and non-profit databases.
Staging Software
License
Provided
that Licensee are in compliance with the terms of this Agreement, Licensee are
authorized to use the Licensed Software in Licensee’s internal, non-production
environment solely for testing purposes in a quantity equal to that of
Licensee’s Managed Objects commercial licenses.
Evaluation
Software. If the Software is an evaluation version
or is provided to Licensee for evaluation purposes, then, unless otherwise
approved in writing by an authorized representative of Licensor, Licensee’s
license to use the Software is limited solely for internal evaluation purposes
in non-production use and in accordance with the terms of the evaluation
offering under which Licensee received the Software, and expires 90 days from
installation (or such other period as may be indicated within the
Software). Upon expiration of the
evaluation period, Licensee must discontinue use of the Software, return to an
original state any actions performed by the Software, and delete the Software
entirely from Licensee’s system and Licensee may not download the Software again
unless approved in writing by an authorized representative of Licensor. The Software may contain an automatic
disabling mechanism that prevents its use after a certain period of time.
ANNEX
2, SPECIFIC
SOFTWARE TERMS
Limited use license to
Sentinel for the purpose of Access Manager reporting and
analytics
The
limited-use license of Sentinel provides the right to collect and process events
from Devices corresponding to licensed Access Manager components. The limited
use license will be deemed to have been exceeded if: i) Sentinel is used to
collect and process events for purposes other than Access Manager
reporting/analytics and/or ii) Sentinel is used to collect events from any
Device not corresponding to licensed Access Manager. In either case, Licensee is
obligated to purchase additional Sentinel licenses sufficient to address any
proposed expanded usage of Sentinel beyond this limited use
license.
SLES Appliance
License. If the Licensed Software is deployed as an
appliance and includes the SUSE Linux Enterprise Server product (SLES) or
portion thereof, Licensee acknowledges and agrees to the following restriction
with respect to use of SLES: notwithstanding the license grant in the SLES
license agreement that may accompany the copy of SLES Licensee received with the
Licensed Software, Licensee agrees to use SLES solely for the purpose of running
the Licensed Software and not as a general purpose operating system. If Licensee
did not receive a copy of the SLES license agreement, it can be found at
http://www.suse.com/licensing/eula/.
eDirectory Software
License. The quantity of licenses for the
eDirectory software included with Licensee’s lawfully acquired user licenses of
the Access Manager Software is equal to the greater of (1) the quantity of User
licenses Licensee has lawfully acquired for the Access Manager Software, or (2)
250,000 Users per company/entity. If Licensee has licensed the Software on an
Instance model, then Licensee may use an equivalent number of Instance licenses
of the eDirectory software, but Licensee’s use of eDirectory software is limited
to use only with the Licensed Software. The foregoing eDirectory licenses are
not upgradeable and are otherwise subject to the license agreement accompanying
the eDirectory software.
Audit
2.0 Software License. Licensee’s use of the Audit Software
included with Access Manager is limited to use solely in connection with Access
Manager. Any other use of the
Audit Software requires the purchase of the applicable Audit Software licenses.
(021219)